P0BB8
Hybrid/EV Battery Voltage Sense Z Circuit
P0BB8 is the open-circuit code of channel Z, the twenty-sixth and last cell channel with a generic P0 code. GM packs with more channels continue with manufacturer codes, for example P1B28 for the circuit of AA in the 2019 tables. The 2019 battery energy control module sets P0BB8 through the same seven cases as its neighbours, with 1.3 V between adjacent cells, under 36 mV on an active balancing gate or excessive splice voltage, 0.8 s in 1.6 s, Type A. GM's eAssist uses the voltage of lines N and N-1 below 1.4 V together with a change above 0.5 V in 200 ms, seven of ten samples, Type B and gated by P1B38. The 2011 Volt already listed P0BB8 among its open sense line faults.
Possible causes
- Sense lead Z interrupted high
- Excessive resistance at the splice or busbar of Z medium
- Monitoring electronics input Z defective low
Symptoms
- MIL and stop or service warning for the drive system
- Ready mode may be refused
- No charging
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BB8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.