P0BB7
Hybrid/EV Battery Voltage Sense Y Circuit Intermittent/Erratic
P0BB7 would describe an unstable sense Y signal, one that is mostly correct but drops out or jumps from time to time. No manufacturer publishes a monitor for it. Where GM covers channel Y, in the 16OBDG02 programme and the 2019 battery and hybrid processor tables, it does so with P0BB3 to P0BB6: line resistance, trend comparison, low and high limits. A brief interruption would there show up as a counted failure inside one of those tests rather than under its own code. P0BB7 thus exists as a J2012 placeholder that satisfies the CARB 1968.2 demand for monitored battery voltage sensors. Diagnosis would focus on connectors, crimps and solder joints that react to movement or heat.
Possible causes
- Intermittent contact in the Y sense connector high
- Crimp or weld on lead Y opening when hot medium
- Hairline crack in a solder joint of input Y low
Symptoms
- Warning lamp appears now and then
- Short-lived power limitation
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BB7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.