P0BB6
Hybrid/EV Battery Voltage Sense Y Circuit High
The battery controller logs P0BB6 when the Y channel climbs above a level no healthy cell reaches. GM's first Volt of 2011 put that limit at 4.8 V or more, 1.4 s within 2 s, with the MIL after one trip. The 16OBDG02 programme samples every 100 ms and fails above 4.90 V in 14 of 18 samples, Type A; the eAssist battery fails above 4.65 V in seven of ten samples at 200 ms, Type B. A wiring fault that connects the Y input to the potential of the next cell is the most common explanation, followed by a failed input. Overcharging of a single cell is possible after a balancing problem and must be ruled out before the pack is charged again.
Possible causes
- Sense input Y bridged to the next cell potential high
- Defective input Y on the monitoring board medium
- Overcharged cell Y after a balancing problem low
Symptoms
- MIL and charging stopped
- Regeneration disabled
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BB6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.