P0BB3
Hybrid/EV Battery Voltage Sense Y Circuit
P0BB3 reports that the sense lead of channel Y, the twenty-fifth cell group, is no longer properly connected. GM's 16OBDG02 programme does not wait for odd voltages but calculates the resistance of the sense line and fails it above 30.00 in seven of nine samples, which is a one-trip Type A fault; the unit is missing in the table. The 2019 battery energy control module instead looks at the cell voltages themselves, for example 1.3 V between neighbours or a reading below 36 mV while that cell is being balanced, with 0.8 s of failure in 1.6 s. The eAssist mild hybrid sets it as a Type B fault when lines N and N-1 both read under 1.4 V and jump by more than 0.5 V. Low and high monitors for Y are blocked while P0BB3 is active.
Possible causes
- Open circuit in sense lead Y high
- Corroded or loose terminal raising line resistance at Y medium
- Cell monitoring slave board fault on input Y low
Symptoms
- MIL and high-voltage system warning
- Vehicle may not start in electric mode
- Charging aborted
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BB3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.