P0BB0
Hybrid/EV Battery Voltage Sense X Circuit Low
When channel X reads too low, P0BB0 is stored. In GM's eAssist mild hybrid the battery interface module sets it below 1.4 V in seven of ten samples at 200 ms, provided the 12 V system is above 8.8 V and the group fault P1B38 is not active, as a two-trip Type B fault. The 2011 Volt and the 16OBDG02 programme work with a far lower limit of about 0.2 V, the latter in 14 of 18 samples at 100 ms, Type A. That difference reflects the cell chemistry and how much voltage a healthy cell can lose. Because an open lead is caught first by P0BAE, a stand-alone P0BB0 is more often a short in the sense harness, a failed input or a cell that has collapsed. Expect reduced power and blocked charging.
Possible causes
- Short between sense lead X and a lower potential high
- Defective measuring channel X in the monitoring electronics medium
- Cell X collapsed or internally shorted low
Symptoms
- Hybrid system warning and MIL
- Electric assist or propulsion reduced
- Charging not possible
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BB0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.