OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0BAC

Hybrid/EV Battery Voltage Sense W Circuit High

P0BAC is the upper counterpart to P0BAB: channel W reports more voltage than a single cell can plausibly hold. GM sets the limit at 4.8 V or more for 1.4 s within 2 s in the 2011 and 2016 Volt battery modules, which makes it a one-trip fault. The 16OBDG02 programme fails at above 4.90 V in 14 of 18 samples, Type A, while the eAssist battery is stricter with more than 4.65 V in seven of ten samples, Type B. A high reading usually comes from a lead touching the potential of the next cell up or from a faulty input, less often from a genuinely overcharged cell. Because overcharging is a safety risk, the controller typically cuts charging and regeneration until the cause is found.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / AC

Possible causes

  • Sense lead W in contact with a higher cell potential high
  • Monitoring board input for W reading too high medium
  • Cell W actually overcharged after a balancing fault low

Symptoms

  • MIL and battery system warning
  • Charging and regeneration stopped
  • Possible reduced power mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0BAC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication