P0BAB
Hybrid/EV Battery Voltage Sense W Circuit Low
A W channel reading at or near zero sets P0BAB. How low is too low depends on the battery: GM's lithium-ion modules of 2016 and 2019 react to 0.2 V or less held for 1.4 s within a 2 s window, Type A, and the 16OBDG02 programme to under 0.20 V in 14 of 18 samples at 100 ms. The eAssist mild hybrid already fails below 1.4 V, seven of ten samples, as long as the 12 V supply exceeds 8.8 V and P1B38 is not active; that fault is Type B. All of these tests stand down while an open sense line fault is present, so a simply broken lead shows up as P0BA9. P0BAB on its own suggests a short towards a lower potential, a dead measuring input or a deeply discharged cell. Power and charging are usually restricted.
Possible causes
- Sense lead W shorted to a lower cell potential high
- Measuring input for W on the monitoring board failed medium
- Cell W deeply discharged or internally shorted low
Symptoms
- Hybrid or EV warning and MIL
- Reduced power output
- Charging limited or blocked
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BAB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.