P0BAA
Hybrid/EV Battery Voltage Sense W Circuit Range/Performance
Here the W reading is not missing but implausible: it fails to follow the rest of the pack. GM's 2019 hybrid powertrain control processor 2 watches for the average cell voltage to move more than 0.022 V between samples and then expects channel W to trend at least 0.005 V in the same direction; 35 failures in 40 samples at 100 ms give a Type A fault. The 16OBDG02 programme applies the same logic with 0.002 V. The eAssist system is more tolerant and only asks the cell to move half as far as the others once the average shifts more than 0.045 V, 20 of 40 samples, Type B. In the 2011 Volt tables W appears as sensor 23 of the rationality check. Drivers often notice nothing beyond the warning lamp.
Possible causes
- Measuring input for W frozen at a fixed value high
- Battery controller software needing an update medium
- Cell W reacting differently to load because of ageing low
Symptoms
- Warning lamp with little change in driving
- Possibly limited regeneration or electric assist
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BAA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.