P0BA8
Hybrid/EV Battery Voltage Sense V Circuit Intermittent/Erratic
P0BA8 completes the five codes of channel V and is meant for an unstable rather than a failed sense V signal. There is no public manufacturer documentation for it. GM covers channel V in its 2011 Volt, eAssist, 2016 and 2019 tables but never with an intermittent monitor, only with P0BA4 to P0BA7. The code exists because CARB 1968.2 requires battery voltage sensors of hybrid storage systems to be monitored and fault codes to isolate the smallest replaceable unit, and J2012 provides an intermittent slot for every sense channel. A fault of this kind would typically be traced to a connection that loses contact under vibration or thermal cycling. Channel W follows from P0BA9.
Possible causes
- Contact of lead V lost intermittently under vibration high
- Joint on channel V opening with thermal cycling medium
- Corroded connector pin for channel V low
Symptoms
- Occasional hybrid or EV warning
- Fault not reproducible during short workshop test
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BA8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.