P0BA7
Hybrid/EV Battery Voltage Sense V Circuit High
P0BA7 is the high-voltage plausibility code for channel V. The battery controller compares the measured value against a ceiling no healthy cell should reach: 4.8 V for 1.4 s within 2 s in GM's 2016 Volt and ELR and in the 2019 battery energy control module (Type A), 4.90 V in 14 of 18 samples of 100 ms in the 16OBDG02 programme (Type A), and 4.65 V in 7 of 10 samples in the eAssist mild hybrid (Type B). Each of these checks waits for the open sense line monitor to pass. A high reading usually comes from a sense lead V pressed against a higher cell tab or busbar, or from a measuring chip that has lost its reference, and only rarely from a cell actually overcharged.
Possible causes
- Sense lead V touching a higher cell tab or busbar high
- Measuring chip with faulty reference reading channel V high medium
- Cell V really overcharged low
Symptoms
- MIL and hybrid or EV warning
- Charging and regeneration reduced
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BA7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.