P0BA6
Hybrid/EV Battery Voltage Sense V Circuit Low
A sense V reading that collapses towards zero produces P0BA6. The threshold depends on the system: GM's eAssist mild hybrid uses under 1.4 V in 7 of 10 samples with at least 8.8 V on the 12 V side, Type B, while GM's lithium-ion battery controllers of 2016 and 2019 go down to 0.2 V or less for 1.4 s within 2 s, Type A. The 16OBDG02 programme sets it below 0.20 V in 14 of 18 samples. Because these tests are blocked by an active open sense line fault, P0BA4 would be reported first if the lead were simply broken; P0BA6 alone tends to mean a short to a lower potential or a failed input. The driver sees a hybrid or EV warning and reduced power.
Possible causes
- Sense lead V shorted to ground or a lower cell high
- Monitoring board input for channel V failed medium
- Cell V genuinely collapsed low
Symptoms
- MIL and service hybrid or EV system message
- Power limited, restart may be refused
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BA6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.