OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0BA4

Hybrid/EV Battery Voltage Sense V Circuit

P0BA4 reports an open or poorly connected sense V lead, the twenty-second channel and the last before W begins at P0BA9. GM's 2019 battery energy control module recognises it through seven cases, including 1.3 V between neighbouring cells, less than 36 mV with the balancing gate on and splice voltages above 0.1 or 0.5 V, with 0.8 s of failure in 1.6 s, Type A. The 2011 Volt already listed P0BA4 among its open sense line codes. In GM's 16OBDG02 programme a measured line resistance above 30.00 in 7 of 9 samples triggers it, in the eAssist mild hybrid low readings on lines N and N-1 together with a 0.5 V jump, Type B, gated by P1B38. Without a good sense lead the pack cannot balance or protect that cell.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / A4

Possible causes

  • Broken or unplugged sense lead V high
  • High-resistance splice or busbar joint on channel V medium
  • Cell monitoring board fault on channel V low

Symptoms

  • MIL and hybrid or EV system warning
  • Vehicle may not become ready to drive
  • Charging blocked

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0BA4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication