P0BA1
Hybrid/EV Battery Voltage Sense U Circuit Low
P0BA1 is stored when sense U reads close to zero. GM's lithium-ion controllers of the 2016 Volt and ELR and of 2019 treat 0.2 V or less over 1.4 s in a 2 s window as a Type A fault, provided no open sense line, lost slave communication or balancing fault is already active. The 16OBDG02 programme with its own battery sensor module uses under 0.20 V in 14 of 18 samples. GM's eAssist mild hybrid applies a much higher limit of 1.4 V in 7 of 10 samples, Type B. The two-mode NiMH trucks have no channel U. A short in the sense lead or a failed measuring input is the most likely finding.
Possible causes
- Sense lead U shorted towards ground or a lower cell high
- Dead measuring input for channel U medium
- Cell U internally shorted or deeply discharged low
Symptoms
- MIL and EV or hybrid system warning
- Propulsion power limited
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0BA1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.