P0B9F
Hybrid/EV Battery Voltage Sense U Circuit
P0B9F covers an open or high-resistance sense U lead, channel twenty-one. From U onward the 2012 two-mode trucks drop out, as their pack has only twenty blocks, so this code is a lithium-ion matter at GM. In the eAssist mild hybrid the test is the familiar one, lines N and N-1 both under 1.4 V with a change above 0.5 V within 200 ms in 7 of 10 samples, Type B, but it is now blocked by P1B38 instead of P1B37. The 16OBDG02 programme measures the sense line resistance and sets above 30.00 in 7 of 9 samples, Type A. The 2016 Volt and ELR decide in 0.6 s, the 2019 controller in 0.8 s of 1.6 s, both on adjacent-cell differences of 1.3 V and splice checks.
Possible causes
- Sense lead U interrupted or detached from its cell high
- Corroded terminal raising the resistance of lead U medium
- Fault in the balancing circuit used for the channel U test low
Symptoms
- MIL and hybrid or EV system warning
- No start or ready mode on some vehicles
- Charging not possible
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B9F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.