P0B9E
Hybrid/EV Battery Voltage Sense T Circuit Intermittent/Erratic
P0B9E would describe a sense T signal that flickers. It lacks any public manufacturer documentation. Even the 2012 two-mode trucks, whose last NiMH block is channel T, monitor it only for range, low and high, and GM's lithium-ion controllers add a circuit test but no intermittent one. The requirement behind the whole code family comes from CARB 1968.2: battery voltage sensors of a hybrid energy storage system are monitored components, and manufacturers must store separate codes that lead to the smallest part replaceable in service. A technician facing this code would wiggle-test the channel T wiring while watching the cell voltage live and look for a reading that dips or spikes for a fraction of a second.
Possible causes
- Loose or spread terminal in the channel T connector high
- Connection that opens with temperature changes medium
- Electrical interference coupling into sense lead T low
Symptoms
- Intermittent warning lamp
- Occasional brief loss of electric drive
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B9E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.