P0B9D
Hybrid/EV Battery Voltage Sense T Circuit High
If sense T reports more voltage than its cell can hold, the battery controller stores P0B9D. GM documents it on several systems. The 2019 battery energy control module and the 2016 Volt set it at 4.8 V or above for 1.4 s within 2 s, Type A, and only when no open sense line fault is pending. The 16OBDG02 programme with a dedicated battery sensor module uses 4.90 V in 14 of 18 samples. The eAssist mild hybrid sets it above 4.65 V in 7 of 10 samples, Type B. In the 2012 two-mode trucks the channel is block 20, the final NiMH block, with a limit of 23 V and 15 of 20 samples, Type B. Most such readings come from wiring touching a higher potential or a faulty measuring input.
Possible causes
- Sense lead T shorted to a higher cell or busbar high
- Measuring input for channel T drifting high medium
- Cell or block T genuinely overcharged low
Symptoms
- MIL and service hybrid or EV system message
- Charging power reduced
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B9D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.