P0B9C
Hybrid/EV Battery Voltage Sense T Circuit Low
P0B9C signals that sense T reads too low. On the 2012 two-mode trucks this is block 20, and because no block 21 exists the low test there looks at block 20 alone: below 2 V in 15 of 20 samples, Type B, while channels R and S each need their upper neighbour to read low as well. GM's lithium-ion controllers from the 2016 Volt to 2019 work with 0.2 V or less for 1.4 s within 2 s, Type A, the 16OBDG02 programme with under 0.20 V in 14 of 18 samples, and the eAssist mild hybrid with 1.4 V in 7 of 10 samples, Type B. Open sense line faults are evaluated first. For the driver the result is a warning and reduced power until the cause is repaired.
Possible causes
- Sense lead T shorted to ground or a lower potential high
- Weak or discharged NiMH block 20 on two-mode packs medium
- Failed measuring input for channel T low
Symptoms
- MIL and hybrid warning
- Reduced power, engine may not shut off on hybrids
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B9C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.