P0B99
Hybrid/EV Battery Voltage Sense S Circuit Intermittent/Erratic
P0B99 is the erratic variant within the sense S group. A public manufacturer description does not exist. GM's tables cover channel S from the 2011 Volt via the 2012 two-mode trucks and eAssist to the 2019 controllers, yet only with circuit, range, low and high codes (P0B95 to P0B98). CARB 1968.2 obliges manufacturers to monitor battery voltage sensors of a hybrid storage system for circuit and rationality faults and to separate the fault codes by replaceable unit, which is why J2012 reserves this slot. Should a vehicle set it, the technician would look for a sense S connection that works most of the time but breaks briefly, typically a fretting terminal or a cracked solder joint on the board.
Possible causes
- Fretting corrosion on the terminal of sense lead S high
- Cracked solder joint for channel S on the monitoring board medium
- Harness chafing that only shorts under movement low
Symptoms
- Sporadic hybrid warning without a pattern
- Code often stored as history, hard to reproduce
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B99
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.