P0B97
Hybrid/EV Battery Voltage Sense S Circuit Low
With P0B97 the controller sees sense S pulled close to zero. In the 2012 two-mode trucks, where S is the nickel-metal hydride block 19, the battery pack control module only sets it when block 19 and block 20 are both below 2 V in 15 of 20 samples, Type B, with the 12 V system between 9 and 18 V. GM's lithium-ion packs work cell by cell: 0.2 V or less for 1.4 s in 2 s on the 2016 Volt and the 2019 controller, Type A, and under 0.20 V in 14 of 18 samples in the 16OBDG02 programme. The eAssist mild hybrid sets it below 1.4 V, 7 of 10 samples, Type B. An open sense line fault takes priority, so P0B97 points more to a short than to a broken lead.
Possible causes
- Sense lead S shorted to ground or to the next lower cell high
- Defective channel S input on the monitoring board medium
- Cell or NiMH block on channel S actually discharged low
Symptoms
- MIL and hybrid or EV warning message
- Restricted power, engine may run more often on hybrids
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B97
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.