P0B93
Hybrid/EV Battery Voltage Sense R Circuit High
A reading on sense R above anything a healthy cell could produce sets P0B93. GM's lithium-ion battery controllers of 2016 and 2019 use 4.8 V or more, held 1.4 s within 2 s, as a Type A fault. The 16OBDG02 programme with its own battery sensor module draws the line at 4.90 V, 14 of 18 samples. GM's eAssist mild hybrid already reacts above 4.65 V (7 of 10 samples, Type B). On the 2012 two-mode trucks the channel is nickel-metal hydride block 18, which must exceed 23 V in 15 of 20 samples, Type B. Because a cell this high would be dangerous, an electrical fault is far more likely: a sense lead touching a higher potential, or a damaged measuring input on the monitoring board.
Possible causes
- Sense lead R in contact with a higher cell potential high
- Damaged measuring input for channel R medium
- Cell on channel R actually overcharged low
Symptoms
- MIL and hybrid system warning
- Charging or regeneration cut back
- Reduced power mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B93
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.