P0B92
Hybrid/EV Battery Voltage Sense R Circuit Low
P0B92 stands for an implausibly low reading on sense R. In GM's lithium-ion battery controllers of 2016 and 2019 the limit is 0.2 V or less for 1.4 s inside a 2 s window, Type A; the test is suspended while an open sense line fault is active, so a broken lead appears as P0B90 rather than P0B92. Programmes with a separate battery sensor module (GM 16OBDG02) use under 0.20 V in 14 of 18 samples. The eAssist mild hybrid applies 1.4 V, 7 of 10 samples, Type B. In the 2012 two-mode trucks R is NiMH block 18, and blocks 18 and 19 must both read under 2 V in 15 of 20 samples (Type B). A short of the sense lead to ground or to a lower cell is the classic cause.
Possible causes
- Sense lead R chafed through and touching ground or a lower cell high
- Failed input for channel R on the cell monitoring board medium
- Cell or block on channel R genuinely collapsed low
Symptoms
- MIL and hybrid or EV system message
- Propulsion limited, possibly no restart
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B92
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.