P0B91
Hybrid/EV Battery Voltage Sense R Circuit Range/Performance
Here the wiring of sense R is intact, but its value does not behave like a real cell. GM's 2019 hybrid powertrain processor demands that cell R moves at least 0.005 V in the same direction whenever the cell average shifts by more than 0.022 V; 35 failures out of 40 samples at 100 ms give a Type A fault. The 2016 Volt allows 7 s of failure in an 8 s window, the ELR 20 of 40 samples at 200 ms. On the 2012 two-mode trucks R is nickel-metal hydride block 18: blocks 18 and 19 are each multiplied by twenty, and if both estimates miss the pack voltage by more than 70 V in 160 of 170 samples, P0B91 is set as Type B. A frozen measuring channel or controller software is the usual suspect.
Possible causes
- Measuring channel R reporting a stuck value high
- Outdated battery controller or hybrid processor software medium
- Block 18 or 19 voltage drifting on two-mode NiMH packs low
Symptoms
- MIL on, vehicle often drives normally
- Less electric assist or regenerative braking
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B91
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.