P0B90
Hybrid/EV Battery Voltage Sense R Circuit
P0B90 is stored when the battery controller concludes that the tap of sense R, the eighteenth cell channel, is open or too resistive. GM's 2019 battery energy control module runs seven cases for it: neighbouring cells 1.3 V or more apart, a reading under 36 mV while the balancing gate is on, or splice voltages above 0.1 V (0.5 V at a busbar splice). The fault has to be present for 0.8 s within a 1.6 s window and is Type A. The 2016 Volt and ELR use the same cases with a 0.6 s window. Oddly, GM's first-generation Volt tables of 2011 to 2015 contain no P0B90 at all, although they list the circuit codes of S to V. Range, low and high faults of R are P0B91 to P0B93.
Possible causes
- Loose, corroded or broken tap of sense lead R high
- Excessive resistance at a splice or busbar joint feeding channel R medium
- Faulty measuring or balancing input on the cell monitoring board low
Symptoms
- MIL with service hybrid or EV system warning
- Reduced propulsion power or no ready mode
- Charging interrupted or refused
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B90
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.