P0B8F
Hybrid/EV Battery Voltage Sense Q Circuit Intermittent/Erratic
P0B8F closes the channel Q group and stands for a sense Q signal that is erratic rather than absent or out of range. No manufacturer documents this code publicly. GM's tables for sense Q, from the 2011 Volt to the 2019 battery controllers, list circuit, range, low and high monitors only, and the Ford Fusion bulletin ends four channels earlier at N. CARB 1968.2 forms the basis: it calls for monitoring of the battery voltage sensors in a hybrid energy storage system and for codes that lead a technician to the faulty part. Physically, an erratic Q reading would point to an unstable connection between tap and measuring chip, such as a cracked crimp, a damaged flexible circuit or a cold solder joint. The next channel, R, starts at P0B90.
Possible causes
- Cracked crimp at the channel Q tap high
- Damaged flexible circuit between cells and monitoring board medium
- Cold solder joint at the measuring chip low
Symptoms
- Sporadic hybrid or EV warning
- Power briefly reduced, normal after restart
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B8F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.