OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B8D

Hybrid/EV Battery Voltage Sense Q Circuit Low

P0B8D reports a voltage on sense Q below the lowest credible cell value. GM's lithium-ion battery controllers in the 2016 and 2019 tables use 0.2 V or less for 1.4 s within 2 s, Type A, and the 2016 program with a separate sense module 0.20 V with 14 of 18 samples. GM's BAS Plus mild hybrid applies 1.4 V, 7 of 10 samples, Type B. In the 2012 two-mode NiMH pack Q is block 17 and the battery pack control module requires blocks 17 and 18 both under 2 V for 15 of 20 samples. The low test is suppressed while an open-line fault is active, so P0B8B takes precedence for a broken lead. Shorts in the sense path are the leading cause; a real deep discharge of the cell would normally trigger further battery codes too.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 8D

Possible causes

  • Short in the Q sense path to a lower potential high
  • Sense module input reading low medium
  • Cell or block 17 deeply discharged low

Symptoms

  • MIL and reduced power mode
  • Engine runs more often on hybrids

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B8D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication