P0B8C
Hybrid/EV Battery Voltage Sense Q Circuit Range/Performance
P0B8C is set when channel Q reports a voltage that fails the plausibility test against the other cells or the pack. On GM's 2012 two-mode trucks Q is NiMH block 17; the battery pack control module takes block 17 and block 18, multiplies each by twenty and compares with the measured pack voltage, failing beyond 70 V in 160 of 170 samples, Type B. GM's lithium-ion programs instead check that cell Q follows the average: the 2016 Volt within 7 of 8 seconds, the Cadillac ELR in 20 of 40 samples, the 2019 controllers in 35 of 40 samples with a 0.005 V trend, all Type A. Because the value itself is within limits, the driver may notice little beyond the MIL. A software update or replacement of the monitoring electronics resolves most cases.
Possible causes
- Monitoring electronics misreading channel Q high
- Outdated battery controller software medium
- Block 17 or 18 voltage deviating on two-mode NiMH packs low
Symptoms
- MIL with little change in driving
- Usable battery capacity reduced
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B8C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.