P0B8B
Hybrid/EV Battery Voltage Sense Q Circuit
P0B8B marks an open circuit on voltage sense Q, the seventeenth channel. In GM's BAS Plus mild hybrid tables Q is the first channel whose open test is blocked by code P1B37 instead of P1B36, which suggests it sits in the next measuring group of the battery interface module; the criterion stays lines N and N-1 below 1.4 V with a change above 0.5 V in 200 ms, 7 of 10 samples, Type B. GM's 2019 battery controller uses 0.8 s in a 1.6 s window, the 2016 version 0.6 s, both Type A with the 1.3 V and 36 mV criteria. The 2011 Volt list includes P0B8B as well. The two-mode NiMH trucks have no circuit code for block 17. Ford does not list it. Typically the vehicle restricts or blocks electric operation until repaired.
Possible causes
- Sense lead Q open between cell tap and module high
- Loose or corroded connector at the second measuring group medium
- Fault in the battery interface module low
Symptoms
- MIL and service vehicle message
- Electric operation blocked or limited
- Fuel consumption rises on hybrids
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B8B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.