P0B8A
Hybrid/EV Battery Voltage Sense P Circuit Intermittent/Erratic
P0B8A is the erratic-signal member of the channel P group. There is no public manufacturer documentation for it: GM describes open, rationality, low and high diagnostics for sense P in its 2016 and 2019 tables, but none for an intermittent signal, and the Ford bulletins stop at channel N. The code exists because CARB 1968.2 requires the voltage sensors of a hybrid battery to be monitored and malfunctions to be stored under distinct codes. If set, the picture would be a channel P value that briefly drops out or spikes, for instance through a fatigued wire near a bend in the sense harness or a connector that loses contact when the pack warms up. Readings in live data may look normal between the events.
Possible causes
- Fatigued wire at a bend of the sense harness high
- Connector losing contact as the pack warms up medium
- Sporadic fault in the cell monitoring chip low
Symptoms
- Warning lamp that goes out again
- Occasional engine start without demand on hybrids
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B8A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.