OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B86

Hybrid/EV Battery Voltage Sense P Circuit

P0B86 belongs to channel P, the sixteenth sense lead, and indicates that this lead has lost its connection to the cell. Comparing GM's tables shows how the timing evolved: the 2016 Volt battery controller decides within 0.6 s, the 2019 version waits 0.8 s in a 1.6 s window; both use the 1.3 V adjacent-cell, 36 mV balancing gate and splice criteria and are Type A. GM's 2016 program with a separate sense module measures the sense line resistance instead, failing above 30.00 in 7 of 9 samples. On the BAS Plus mild hybrid the code is Type B after 7 of 10 samples showing lines N and N-1 below 1.4 V with a step over 0.5 V. Ford's public bulletins do not list P0B86. The pack usually has to come out for repair.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 86

Possible causes

  • Sense lead P open at the cell tap or connector high
  • Excessive resistance in the sense line (corrosion, loose screw) medium
  • Defective input of the sense module low

Symptoms

  • MIL and hybrid system fault message
  • Vehicle runs only on the engine or with reduced power

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B86

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication