P0B85
Hybrid/EV Battery Voltage Sense O Circuit Intermittent/Erratic
P0B85 would mark a channel O signal that is present but unsteady, with spikes or brief gaps. No manufacturer documents this code publicly; even GM, whose public tables cover channel O in detail from 2011 onward, defines only the open, rationality, low and high tests for it. The requirement behind the code family comes from CARB 1968.2: voltage sensors of a hybrid energy storage system must be monitored like other electronic components, with fault codes that identify the part to replace. A plausible cause for such a signal is a contact resistance that changes with movement, heat or moisture, typically at the cell tap, the busbar screw or the connector of the sense harness. A fault that vanishes and returns calls for wiggle testing with live data.
Possible causes
- Loose busbar screw changing contact resistance at tap O high
- Moisture or corrosion in the sense harness connector medium
- Cracked joint on the monitoring board low
Symptoms
- Warning that comes and goes
- Short-term power reduction during driving
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B85
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.