P0B7E
Hybrid/EV Battery Voltage Sense N Circuit Low
P0B7E sets when channel N reads below the lower plausibility limit. GM's 2016 program with a separate battery sense module uses less than 0.20 V and needs 14 failures in 18 samples, about 1.8 s at 100 ms each, before a Type A fault; the open-circuit test must not be failing at the same time. The other GM lithium-ion controllers use 0.2 V or less for 1.4 s in 2 s, also Type A. The BAS Plus mild hybrid works with 1.4 V and 7 of 10 samples, Type B. On 2012 two-mode trucks N is NiMH block 14, and blocks 14 and 15 must both drop under 2 V. A low reading usually comes from the measuring path, not from the cell: a lead shorted to a lower potential or a damaged input stage.
Possible causes
- Sense lead N shorted to a lower potential high
- Damaged input stage in the sense module medium
- Deeply discharged or failed cell on channel N low
Symptoms
- MIL from the first trip on lithium-ion GM systems
- Hybrid system limits power
- Combustion engine does not shut off at standstill
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B7E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.