P0B7C
Hybrid/EV Battery Voltage Sense N Circuit
Voltage sense N, the fourteenth channel, reports a broken or high-resistance sense lead with P0B7C. It is the last code in Ford's TSB 23-2039: 2019-2020 Fusion plug-in hybrids that fail to start with any open-circuit code from P0B3B up to P0B7C get a replacement traction battery; the bulletin names no channel beyond N. In GM's 2019 battery controller tables N is the first channel whose open test runs 0.8 s within a 1.6 s window instead of 0.6 s, while the criteria (1.3 V adjacent-cell difference, 36 mV balancing gate, splice limits) stay the same, Type A. A second GM program of 2016 closes the balancing gates in a test pattern, turns the voltage drop into a sense-line resistance and fails above 30.00 in 7 of 9 samples, Type A.
Possible causes
- Internal traction battery fault (Ford Fusion PHEV 2019-2020) high
- Sense lead N broken or with excessive resistance medium
- Fault on the cell monitoring board low
Symptoms
- No start or vehicle does not become ready
- MIL and stop-safely or service message
- Plug-in charging unavailable
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B7C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.