P0B7B
Hybrid/EV Battery Voltage Sense M Circuit Intermittent/Erratic
P0B7B is reserved for a sense M signal that flickers: short dropouts or jumps while the circuit is otherwise intact. No manufacturer documents this code publicly. GM's tables for channel M contain open, plausibility, low and high tests but no erratic test, and Ford's Fusion bulletin lists only the open-circuit code P0B77. The legal footing is CARB 1968.2, which requires the battery voltage sensors of a hybrid energy storage system to be monitored as electronic components and demands fault codes that point to the smallest replaceable unit. In practice a loose crimp at the M tap, a chafed lead in the sense harness or a cracked solder joint on the monitoring board would cause such a signal. Expect warnings that come and go.
Possible causes
- Loose crimp or connector at the channel M tap high
- Chafed wire in the cell sense harness medium
- Cracked solder joint on the monitoring board low
Symptoms
- Hybrid warning appearing and clearing again
- Brief drops in electric power
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B7B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.