P0B7A
Hybrid/EV Battery Voltage Sense M Circuit High
A reading on channel M above what any healthy cell can deliver produces P0B7A. For lithium-ion packs GM sets the line at 4.8 V or more for 1.4 s in a 2 s window and treats it as Type A, illuminating the MIL on the first trip. The BAS Plus mild hybrid already reacts above 4.65 V in 7 of 10 samples, Type B. Where M stands for NiMH block 13, as on the 2012 two-mode trucks, a block voltage above 23 V for 15 of 20 samples is the trigger, again Type B, with the 12 V system between 9 and 18 V. Because a cell itself rarely climbs that high, a sense lead touching a higher potential or a faulty measuring input is far more likely than overcharging. The vehicle will usually limit charging and electric drive.
Possible causes
- Sense lead M in contact with a higher cell potential high
- Measuring input of channel M reading high medium
- Real overvoltage of the cell after a balancing fault low
Symptoms
- MIL on from the first trip (GM lithium-ion, Type A)
- Charging stopped or limited
- Reduced electric power
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B7A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.