P0B79
Hybrid/EV Battery Voltage Sense M Circuit Low
P0B79 means that the voltage reported for sense M is too low to be real. GM's lithium-ion battery controllers of 2016 and 2019 set it at 0.2 V or less, held for 1.4 s inside a 2 s window, Type A, and only while no open sense line fault is active, so a broken lead is reported by P0B77 first. On the 2012 two-mode hybrids M is block 13: the battery pack control module needs block 13 and block 14 both below 2 V in 15 of 20 samples, Type B. The BAS Plus mild hybrid uses 1.4 V, 7 of 10 samples, with the 12 V supply above 8.8 V. Typical sources are a sense lead shorted towards ground or a lower cell, a failed measuring input, or rarely a cell that has truly collapsed.
Possible causes
- Sense lead M shorted to ground or a lower cell potential high
- Failed measuring input on the monitoring board medium
- Cell or NiMH block on channel M actually collapsed low
Symptoms
- MIL and service hybrid or EV system message
- Electric drive or assist disabled
- Engine runs continuously on hybrids
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B79
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.