OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B78

Hybrid/EV Battery Voltage Sense M Circuit Range/Performance

With P0B78 the controller doubts the reading of channel M rather than its wiring. GM's 2019 hybrid powertrain processor watches for a frozen value: whenever the average of all cells moves by more than 0.022 V, cell M must follow by at least 0.005 V in the same direction, and 35 failures in 40 samples at 100 ms set a Type A fault. The 2012 two-mode trucks map M to nickel-metal hydride block 13 and multiply blocks 13 and 14 by twenty; if that estimate misses the pack voltage by more than 70 V in 160 of 170 samples, the code is stored as Type B. The BAS Plus mild hybrid wants at least half the average movement, 20 of 40 samples, Type B. A plausible but wrong value is often a controller or measuring board issue.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 78

Possible causes

  • Measuring channel M stuck at a fixed value high
  • Battery controller software needing an update medium
  • Block 13 voltage drifting from the pack on two-mode NiMH packs low

Symptoms

  • MIL on, often without noticeable driving change
  • Reduced electric assist or regeneration

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B78

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication