P0B75
Hybrid/EV Battery Voltage Sense L Circuit High
With P0B75 the battery controller rejects channel L because it reads above any value a real cell or block can reach. GM's lithium-ion systems in the 2016 Volt and the 2019 tables set it at 4.8 V or more over 1.4 s in a 2 s window, Type A, one trip; GM's BAS Plus mild hybrid at above 4.65 V in 7 of 10 samples, Type B. On the 2012 two-mode trucks, block 12 must exceed 23 V in 15 of 20 samples, sampled every 100 ms, before the code is stored as Type B. The pairing with P0B74 helps diagnosis: low points to a short downward, high to contact with a higher tap or a floating input. While it is active, charging and regeneration are normally limited to protect the pack.
Possible causes
- Channel L lead touching a higher tap high
- Floating measuring input after an open reference line medium
- Real overvoltage of the cell after a charging fault low
Symptoms
- Charging and regeneration limited
- MIL and hybrid or EV warning
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B75
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.