P0B70
Hybrid/EV Battery Voltage Sense K Circuit High
P0B70 says that cell voltage K reads too high to be genuine. GM's 2019 battery energy control module sets it at 4.8 V or more, held for 1.4 s within 2 s, as a Type A fault with immediate MIL, and only when no communication loss, open sense line or internal module fault takes precedence. The same principle appears with other numbers elsewhere at GM: 4.65 V and 7 of 10 samples on the BAS Plus mild hybrid, 23 V for nickel-metal hydride block 11 on the 2012 two-mode trucks. The difference to P0B6F is the direction, not the location: a high reading typically comes from a lead touching a higher potential, a low one from a short to a lower one. Charging is usually blocked while it is active.
Possible causes
- Channel K lead in contact with a higher tap high
- Floating measuring input after loss of its lower reference medium
- Cell monitoring chip fault low
Symptoms
- Charging blocked
- MIL and power limitation
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B70
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.