P0B6F
Hybrid/EV Battery Voltage Sense K Circuit Low
GM's BAS Plus mild hybrid, the eAssist system in table 13OBDG05C, gives P0B6F a simple rule: if the cell sense line for channel K measures below 1.4 V in 7 of 10 samples at 200 ms while the 12 V supply is above 8.8 V, the code is stored as Type B, two trips. Since a lithium-ion cell in use never falls that low, the value must come from a short or a failed input. GM's later battery energy control modules work with 0.2 V and a 1.4 s window, Type A, and the 2012 two-mode trucks with nickel-metal hydride blocks 11 and 12, both under 2 V. The driver typically sees a hybrid warning and loses electric assist; the engine takes over more of the work.
Possible causes
- Channel K sense line shorted to ground or a lower tap high
- Failed measuring input in the battery interface module medium
- Blown protective element in the sense line low
Symptoms
- Hybrid warning and MIL after the second trip
- Auto stop and electric assist disabled
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B6F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.