P0B6E
Hybrid/EV Battery Voltage Sense K Circuit Range/Performance
In a nickel-metal hydride pack with 20 equal blocks, twenty times one block voltage should roughly equal the whole pack voltage. GM's 2012 two-mode hybrids use exactly this for P0B6E, assigned to block 11: the battery pack control module checks blocks 11 and 12, and if both scaled values deviate from the pack voltage sensor by more than 70 V in 160 of 170 samples, the code is set, Type B. The test only runs with the contactors closed for over 200 ms and no pack voltage fault active. GM's lithium-ion controllers judge channel K differently, as a frozen value that fails to follow the average cell voltage (35 of 40 samples, Type A, in the 2019 tables). No other manufacturer publishes it.
Possible causes
- Block or cell voltage measurement of channel K out of calibration high
- Pack voltage sensor reading off, distorting the comparison medium
- Measuring input stuck at one value low
Symptoms
- MIL after two trips
- Less electric assist, more engine running
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B6E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.