P0B6D
Hybrid/EV Battery Voltage Sense K Circuit
P0B6D marks an open circuit on voltage sense K, the eleventh cell measuring channel. GM has used the code since its first published hybrid tables: in 2011 the open-line test already checked bus bar voltages, flagging more than 0.7 V. The 2019 battery energy control module refines it into seven cases, among them adjacent cells 1.3 V apart, a cell under 36 mV with balancing active and splice voltages over 0.1 V, all judged in a 0.6 s window and set as Type A. Ford counts P0B6D among the open sense line codes that leave a 2019-2020 Fusion plug-in hybrid unable to start and fixes it by replacing the traction battery. Before any pack work, the high-voltage system has to be disabled by trained staff.
Possible causes
- Loose or corroded bus bar connection at the channel K tap high
- Internal traction battery fault, pack replacement (Ford Fusion PHEV) medium
- Broken sense wire between cells and monitoring board medium
Symptoms
- Vehicle not ready to drive
- Hybrid or EV system warning with MIL
- Charging not possible
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B6D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.