P0B6C
Hybrid/EV Battery Voltage Sense J Circuit Intermittent/Erratic
No manufacturer documents P0B6C publicly. The code stands for a channel J signal that is unstable, with brief jumps or dropouts, as opposed to the steady faults covered by P0B68 to P0B6B. CARB section 1968.2 requires that the individual electronic inputs of a hybrid energy storage system, battery voltage sensors expressly included, be monitored for circuit and rationality faults; erratic behaviour is one way such a fault can show. GM, which publishes tests for the other four channel J codes, lists none for this one. For the driver it would mean a warning that comes and goes, possibly with short power cuts. A cable or connector with marginal contact is the most plausible cause.
Possible causes
- Marginal contact in the channel J harness or connector high
- Cracked solder joint on the monitoring electronics medium
Symptoms
- Intermittent warning light
- Brief power reductions while driving
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B6C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.