P0B6A
Hybrid/EV Battery Voltage Sense J Circuit Low
A reading of almost zero on channel J points to the measurement, not to the cell, and that is what P0B6A records. In GM's lithium-ion systems (2016 and 2019 tables) the battery energy control module sets it at 0.2 V or less for 1.4 s within 2 s, Type A. The interesting part is what it ignores: while a module communication loss, an open sense line code, a balancing fault or an internal module fault is active, P0B6A stays silent so that the root cause is stored first. The 2012 two-mode hybrids look at nickel-metal hydride block 10 together with block 11, both below 2 V in 15 of 20 samples, Type B. Expect reduced or no electric drive until the circuit is repaired.
Possible causes
- Channel J lead chafed through and shorted to ground high
- Damaged measuring input on the monitoring board medium
- Cell on channel J internally shorted low
Symptoms
- Electric drive limited or unavailable
- MIL and battery warning message
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B6A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.