P0B69
Hybrid/EV Battery Voltage Sense J Circuit Range/Performance
P0B69 is set when channel J is electrically present but its readings do not behave plausibly. GM's BAS Plus mild hybrid explains the logic most clearly: once the average cell voltage moves by more than 0.045 V, the cell under test must move in the same direction and by at least half as much; 20 failures in 40 samples set the code as Type B, two trips. The 2019 lithium-ion tables use a tighter trigger of 0.022 V and 35 of 40 samples, Type A. On the 2012 two-mode trucks the code belongs to nickel-metal hydride block 10 and compares its scaled value with the pack voltage. Neither Ford nor Chrysler publishes this channel; Chrysler's Pacifica bulletin stops at sense 6.
Possible causes
- Channel J input reacting too little to real voltage changes high
- Corroded or high-resistance cell tap medium
- Calibration error in the battery controller low
Symptoms
- MIL without obvious driveability problem
- Hybrid assist reduced
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B69
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.