P0B68
Hybrid/EV Battery Voltage Sense J Circuit
For owners of a 2019 or 2020 Ford Fusion plug-in hybrid, P0B68 is best known from bulletin 23-2039: the car will not start, the battery energy control module stores one or more open sense line codes from P0B3B to P0B7C, and the prescribed repair is a complete high-voltage traction battery. Technically the code says that the tenth measuring channel, J, has lost its connection to the cells. GM describes the test in detail for its lithium-ion packs: within 0.6 s it looks for adjacent cells 1.3 V apart, a cell under 36 mV while being balanced, or splice voltages above 0.1 V or 0.5 V, and sets P0B68 as Type A. GM's BAS Plus mild hybrid uses a 1.4 V and 0.5 V rate-of-change test, Type B.
Possible causes
- Internal traction battery failure, pack replacement (Ford Fusion PHEV 2019-2020) high
- Open sense wire or cell tap on channel J medium
- Bad bus bar or splice connection near channel J low
Symptoms
- No start, vehicle does not become ready
- Hybrid system warning on the cluster
- Plug-in charging unavailable
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B68
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.