P0B67
Hybrid/EV Battery Voltage Sense I Circuit Intermittent/Erratic
SAE J2012 reserves P0B67 for an unsteady signal on channel I, meaning readings that spike, drop and recover. No manufacturer documents this code publicly, and none of the GM tables that define the other four channel I codes includes an erratic test. The fault picture would sit between an open circuit (P0B63) and a frozen value (P0B64): the line works most of the time but loses contact under vibration, heat or current load. CARB requires battery voltage sensors to be monitored as inputs of the energy storage system, which explains why the code exists at all. For diagnosis, record cell voltage I with a scan tool during a drive and compare its noise with neighbouring channels H and J.
Possible causes
- Sense contact on channel I opening under vibration or heat high
- Corroded terminal in the module connector medium
Symptoms
- Sporadic warning without a reproducible pattern
- Momentary drop in electric power
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B67
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.