P0B66
Hybrid/EV Battery Voltage Sense I Circuit High
When channel I claims a voltage above what its cell or block can physically reach, the controller stores P0B66. The thresholds GM publishes depend on chemistry and architecture: lithium-ion packs with a battery energy control module set it at 4.8 V or more for 1.4 s in a 2 s window, Type A, one trip; the BAS Plus mild hybrid at above 4.65 V in 7 of 10 samples, Type B; the 2012 two-mode trucks, which measure nickel-metal hydride block 9 rather than single cells, above 23 V in 15 of 20 samples, Type B. Every limit sits clearly above normal full charge, so a real overcharged cell is unlikely. Look first for a sense lead touching the next tap up or for a measuring input that has lost its reference.
Possible causes
- Channel I lead touching a higher-potential tap high
- Open reference or ground of the measuring chip medium
- Genuinely overcharged cell after a charging control fault low
Symptoms
- Charging stops or is refused
- MIL and reduced power
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B66
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.