OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B64

Hybrid/EV Battery Voltage Sense I Circuit Range/Performance

P0B64 is a rationality fault: channel I is connected and reads a believable number, yet it does not move with the other cells. GM's 2016 Chevrolet Volt compares the movement of each cell with the average; if channel I does not follow when the average moves by more than 0.022 V, 7 out of 8 seconds fail the check, Type A. The 2019 hybrid powertrain control processor 2 tables keep the idea but count samples, 35 failures out of 40 at 100 ms. On the 2012 two-mode trucks the same code belongs to nickel-metal hydride block 9, whose scaled value must stay within 70 V of the pack voltage. Because the input is alive but stuck or drifting, a software update or the monitoring board is a likelier fix than wiring.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 64

Possible causes

  • Channel I measuring input frozen at a constant value high
  • Battery controller software misjudging the channel medium
  • High-resistance cell tap damping the signal low

Symptoms

  • MIL on, vehicle drives normally
  • Reduced hybrid assist or electric range

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B64

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication