P0B5F
Hybrid/EV Battery Voltage Sense H Circuit Range/Performance
With P0B5F the channel H wiring is intact, but the value it delivers does not fit the rest of the battery. GM runs two quite different plausibility tests. On the 2012 two-mode hybrids (Tahoe, Yukon, Escalade, Silverado, Sierra) channel H is nickel-metal hydride block 8 of 20; the battery pack control module multiplies blocks 8 and 9 by twenty and fails the test when both differ from the measured pack voltage by more than 70 V in 160 of 170 samples, Type B, two trips, with active pack voltage codes P0ABB to P0ABD blocking it. Lithium-ion systems in the 2019 tables look for a frozen reading instead: if H stays put while the average cell voltage trends, 35 of 40 samples set the code, Type A.
Possible causes
- Block or cell voltage input for channel H drifting away from the true value high
- Measuring chip input stuck at a constant value medium
- Faulty pack voltage reference distorting the comparison low
Symptoms
- Hybrid system warning with MIL
- Reduced electric assist or regeneration
- Inaccurate state-of-charge display
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0B5F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.