OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0B5E

Hybrid/EV Battery Voltage Sense H Circuit

P0B5E flags a broken measuring path on voltage sense H, the eighth cell tap channel read by the battery monitoring electronics. In GM's 2019 tables the battery energy control module runs an open sense line test within a 0.6 s window: neighbouring cells diverging by 1.3 V or more, a cell under 36 mV while its balancing switch is on, or a splice above 0.1 V (0.5 V at a bus bar splice) sets it as Type A. Ford names P0B5E in two bulletins: a no-start on the 2019-2020 Fusion plug-in hybrid, repaired with a new traction battery, and the 2023 Mustang Mach-E and E-Transit, where H is the last code of the affected range and an intermittent flexible printed circuit at the BECM is blamed. Starting and charging may fail.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberB / 5E

Possible causes

  • Intermittent flexible printed circuit cable at the battery controller (Ford Mach-E, E-Transit 2023) high
  • Open cell tap, splice or bus bar connection on channel H medium
  • Internal traction battery failure requiring pack replacement (Ford Fusion PHEV) medium

Symptoms

  • Powertrain malfunction (wrench) indicator and Stop Safely Now message
  • Vehicle does not start or does not become ready to drive
  • High-voltage battery cannot be charged

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0B5E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication